C. technical specifications – Vivotek VS3102 User Manual
Page 82
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
81
C. Technical specifications
Remote Management
Configuration and system log can be accessed
via Web browser and FTP application remotely.
Networking
Protocol
UPnP, TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS,
DDNS and DHCP
Modem
PPP (dial-up, direct cable connection)
Physical
10baseT Ethernet or 100baseT Fast Ethernet
Audio
Algorithm Supported
24K bps wideband audio coding
Audio Inputs
1 RCA mono audio input
Video
Algorithm Supported
MPEG4 (short header mode)
Video Inputs
1 BNC composite video input
NTSC/PAL auto-sensing
Features
Adjustable image size, quality and bit-rate
3 motion detection windows
Time stamp and text overlay
Video Resolution
NTSC
Up to 30 frames at 176x120
Up to 30 frames at 352X240
Up to 10 frames at 704X480
PAL
Up to 25 frames at 176x144
Up to 25 frames at 352X288
Up to 10 frames at 704X480
Viewing System Requirement
Protocol
Standard internet TCP/IP suite
Operating System
Microsoft Windows98 SE, ME, NT4.0, 2000, XP
Browser
Internet Explorer 5.x or above,
General I/O
1 opto-isolated sensor input (max. 12VDC 50mA)
1 output relay (max. 24VDC 1A, 125VAC 0.5A)
Alarm Features
Motion detection with percentage and sensitivity
Daily repeat timing schedule
3 color JPEG images for pre/post alarm image storage
Automatic transfer of stored images via email or FTP with event-
triggered actions
RS232/RS485
9 pin D-SUB RS232 or RS485(PTZ camera control) max.115.2Kbps
PAN/TILT/ZOOM
PTZ camera control through RS232 or RS485
Supported units and protocol:
Sony VISCA
Canon VC-C1, VC-C3, VC-C4
Dynacolor DynaDome
Pelco D-protocol
LiLin PIH-7x00
CCTV, Cohu
CGI command serial driver is supported
Remote Software Upgrade
System firmware upgradeable via FTP
Security
Administrator and user group protected
Password authentication
Optional Software
Record and play pictures on PC hard disk
I/O ports monitoring feature
LED Indicator
Status indicators
Network indicator
Heartbeat indicator
Power
Consumption: near 4.2W
Input:: 100~240VAC, 50/60Hz, 0.4A
Output :12VDC,1.5A