Vivotek VS3102 - Manual (Page 52)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
51
PTZ camera configuration
Since the Video Server can be used in either Ethernet network or PPP network, the single serial port can
be used to control either external COM port devices like a PTZ camera or modem. While in PPP interface,
go to Modem page for modem configuration. Options on this page will be ignored.
The Video Server supports RS232 and RS485 interfaces to control external serial port devices. Refer to
the hardware description to connect an RS485 device. The included camera control cable can be used for
Sony or Canon cameras.
Administrator can pull down the list to select UART "Interface Mode" according to the connected device
and select the camera model directly to save time in detection.
The "Baud Rate (bps)" of the serial port is up to 115200 bps.
The Video Server can support any other custom camera by selecting "Custom Camera" type. If the
attached device is not a PTZ camera, a specific URL can be utilized as an alternative method. See the
advanced section for details.