Vivotek VS3102 - Manual (Page 61)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
60
Advanced functions
Viewing system log
Click the link on the configuration page to view the system log file. The content of the file provides useful
information about configuration and connection after system boot- up.
Viewing system parameters
Click on this link on the configuration page to view the entire system’s parameter set. The content is the
same as those in CONFIG.INI.
Restore factory default settings
Click on this link on the configuration page to restore the factory default settings. Any changes made so
far will be lost and the system will be reset to the initial factory settings. After clicking on the “Restore”
button and make confirmation, the system will restart and require the installer program to set up the
network again.
Clear data path for proprietary commands
The Video Server provides a highly customized control support to third-party serial interface devices
aside from PTZ cameras. That means in addition to setting up a custom camera with PTZF commands,
users may utilize this mode and introduce a customized homepage to transmit arbitrary user-defined
commands from the user-side to the Video Server. The third-party device connected to the serial port of
the Video Server will receive the same command sent by the originator. The user only needs to attach the
command in ASCII format after the special URL. The Video Server will parse the command and transfer
into binary code to send out. See the clear data mode serial port driver in the URL commands of the Video
Server section for detailed description.