Vivotek VS3102 - Manual (Page 76)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
75
<other than yes> no dial-out allowed
Tone (ATDT) make modem dial in tone method
Pulse (ATDP) make modem dial in pulse
reatt <integer> redial attempts
discon <integer> minutes delay before disconnection
init <text string shorter than 40 characters> command to initialize modem
phone1 <text string shorter than 40 characters> phone number of primary ISP
user1 <text string shorter than 40 characters> user name for primary ISP
pass1 <text string shorter than 40 characters> password for primary ISP
phone2 <text string shorter than 40 characters> phone number of secondary ISP
user2 <text string shorter than 40 characters> user name for secondary ISP
pass2 <text string shorter than 40 characters> password for secondary ISP
Application configuration URL
URL: /setup/app.cgi
NAME VALUE DESCRIPTION
emode <not required> event mode application
smode <not required> sequential mode application
mail upload snapshots by email smethod
ftp upload snapshots by FTP
suffix <not required> FTP file with date and time suffix
delay <integer> seconds delay to detect next event
inter <integer> seconds delay to capture post-event
dihigh < not required > set DI high as trigger condition
dilow < not required > set DI low as trigger condition
dirise < not required > set DI rising as trigger condition
difall < not required > set DI falling as trigger condition
motion1 < not required > set motion window1 as trigger condition
motion2 < not required > set motion window2 as trigger condition
motion3 < not required > set motion window3 as trigger condition
ioalarm < not required > trigger DO when DI condition matched
mdalarm < not required > trigger DO when motion detected
ioupload < not required > upload snapshot when DI condition matched