Vizio RP56 - Manual (Page 28)

VIZIO RP56 User Guide
040330 25
Connecting an External Receiver or Amplifier
You can connect an external receiver or amplifier to your DLP TV. Your DLP TV is equipped with an
external speaker switch that can automatically send a remote turn-on/off signal to the connected
external receiver or amplifier.
1.
Turn off the power to the DLP TV and receiver or amplifier.
2. Connect the R (red color) and L (white color) audio connectors on the rear of your receiver or
amplifier to the R (red color) and L (white color) audio output connectors in the AUDIO OUT
group on the rear of your DLP TV.
3. Turn on the power to the DLP TV and receiver or amplifier.
4. Press the MENU button on the front of your DLP TV or on the remote control to activate the On
Screen Display (OSD).
5. Press the TADJUST (- CH) button on the front of your DLP TV four times to highlight AUDIO
ADJUST and press the OK button to select this Sub Menu.
6. Press the TADJUST (- CH) button on the front of your DLP TV five times to highlight REAR
AUDIO OUT and press the ADJUST X (VOL +) to change from FIXED (Line Out) to VARIABLE
so that you can use the Volume buttons on the front of your DLP TV or on the remote control or
change from VARIABLE to FIXED to use the Volume buttons on the receiver or amplifier.