Vizio RP56 - Manual (Page 47)

VIZIO RP56 User Guide
040330 44
Cleaning & Maintenance
Cleaning the Screen
The screen of the DLP TV has been specially treated. To clean, users should wipe the surface gently
using only a cleaning or a soft, lint-free cloth. If the surface is particularly dirty, use a little water on the
cloth (never directly on the screen), then wipe the screen with it.
Reminders:
ƒ Do not use substances such as glass cleaners, solvents and/or thinners.
ƒ Do not scratch or hit the surface of the screen with fingers or any hard objects.
The screen of the DLP TV is made
of specially coated plastic and can be
scratched or damaged by abrasive or
ammonia-based window cleaners.
Scratches on the bezel or screen are
not covered by the warranty
.
ƒ Do not scratch or hit the surface of the screen with fingers or any hard objects.
Cleaning the Exterior
The DLP TV is cooled by air circulated through the vents in the case so for optimized performance,
keep the vents clear of dust. To clean, turn off and unplug the DLP TV, then brush the dust away from
the vents with a damp cloth. Be careful not to drip any water into the vents.
Reminders:
ƒ Do not attempt to clean dust from the inside of the DLP TV.
ƒ Do not use abrasives or solvent cleaners because they can damage the finish on the
components.
ƒ Do not allow any excessive water or moisture to come into contact with the surface of the DLP
TV. If water or moisture gets inside the DLP TV, operating problems and electrical hazards
may result.
ƒ Do not scratch or hit the surface of the screen with fingers or any hard objects.
ƒ Do not place articles made of rubber or PVC near the cabinet for any extended periods of time.