Vizio RP56 - Manual (Page 33)

VIZIO RP56 User Guide
040330 30
PICTURE ADJUST – PC Modes
CONTRAST – Adjusts the contrast of the picture.
BRIGHTNESS – Adjusts the brightness of the picture.
Users may need to readjust the brightness after the DLP
TV warms up.
H POSITION – Adjusts the horizontal screen position.
V POSITION – Adjusts the vertical screen position.
AUTO CONFIG – Automatically adjusts to the best
settings.
ADC CLOCK – Removes any vertical distortion and
clears or sharpens the displayed characters.
ADC PHASE – Removes any horizontal distortion and
clears or sharpens the displayed characters.
WIDE FORMAT - Adjusts the screen width to
STRETCH, CENTER, PANORAMIC, or ZOOM viewing
mode.
PIP SETUP
PIP STYLE – Turns PIP mode on or off, or chooses one
of the following pre-set modes:
ƒ SPLIT – The screen is divided in half. The left
side is the main picture and the right side is the
sub-picture.
ƒ POP – The screen is in the 16:9 mode and
divided in half. The left side is the main picture
and the right side is the sub-picture.
ƒ MAIN + 3 – The main picture is on the left and
there are three small sub-picture windows on the
right.
ƒ MAIN + 7 – The main picture is on the bottom
left and there are four small sub-picture windows
across the top and three small sub-pictures on
the right.
ƒ SCAN – The screen is divided into 12 small sub-
pictures.
WIDE – Changes the sub-picture size. Choose between
4:3 and 16:9.
SIZE – Changes the size of the sub-picture.
H
POSITION – Moves the sub-picture left or right.
V POSITION – Moves the sub-picture up or down.
TRANSPARENCY – Adjusts the sub-picture
transparency.