VIEWSONIC VPC100 - Manual (Page 24)

ViewSonic VPC100 13
Operating
Using the Power Button
Turning On the All-in-One PC
Press the power button to turn on your All-in-One PC.
WARNING
Turning off your computer before it fully boots, may cause an error the next time you
turn on your All-in-One PC.
Turning Off the All-in-One PC
In Windows XP ® , click Start > Turn Off Computer > Turn Off or push the power
button.
NOTE
You can configure Windows to automatically shut down when you press the power
button. To do this, click Start > Control Panel > Power Options > Advanced tab. In
the Power buttons option, select “Shut down” from the list. Be sure to shut down all
running applications before powering off.
Using the Card Reader
The built-in card reader supports various types of memory cards, such as XD, SD,
SDHC, MS, MS Pro, and MMC.
Inserting the card
1. Insert the card with the metallic connectors facing towards you.
2. Push gently until the card clicks into place.
Removing the card
NOTE
Before removing a memory card, use the configuration utility on the taskbar to stop
the memory card operation. Failure to do so may result in data loss.
1. Push the card gently to eject it.
2. Pull the card out from the port.