VIEWSONIC VPC100 - Manual (Page 34)

ViewSonic VPC100 23
BIOS Setup Utility
Boot Settings Configuration
With this sub-menu, you can configure the type of system boot to execute.
• Quick Boot: Enable Quick Boot to allow BIOS to skip certain tests while
booting. This will decrease the ti me needed to boot the system.
• Full logo display: When disabled, the normal POST (Power On Self
Test) messages are displayed when the system boots up. When enabled,
ViewSonic ® logo is displayed instead.
• Bootup Num-Lock: Turn the “Power-on state for Numlock” on or off.
Boot Device Priority
This sub-menu lets you specify the boot priority sequence from the available
devices.
To change the specified device, press [Enter] to select an available device from
the list.