VIEWSONIC VPC100 - Manual (Page 42)

ViewSonic VPC100 31
System Recovery
When to Use System Recovery
You need to run system recovery:
• In the event of a system or hardware failure.
• You need to restore the system back to its default settings.
• You forgot the system password.
System recovery will format the hard disk and restore the system to its default
settings. However all files and other data on drive C: will be deleted.
Running ViewSonic ® Recovery Manager
Your All-in-One PC uses ViewSonic ® Recovery Manager for system recovery
functions.
To run ViewSonic
® Recovery Manager, follow the steps below:
1. Turn on the All-in-One PC. The system boots up and the ViewSonic ® logo
appears.
2. When the screen displays F3..., quickly press the F3 button on the keyboard.
The window below appears.
NOTE
If Windows operating system starts up before you press F3 and you still
wish to run System Recovery, restart the All-in-One PC then follow the same
procedures above.
System Recovery Option
ViewSonic Recovery Manager
Exit
3. Click ViewSonic ® Recovery Manager.
This action will format your hard disk and all data on Cdrive will be
lost. Please be sure to continue again.
OK Cancel
This action will get your system back to default settings. All files
and settings on C drive will be lost. Are you sure to continue ?
OK Cancel