Bios setup utility – VIEWSONIC VPC100 User Manual
Page 32
ViewSonic VPC100
21
BIOS Setup Utility
ACPI Configuration
The ACPI Configuration sub-menu allows you to configure the Advanced
Configuration and Power Interface (ACPI) settings. The General ACPI
Configuration is under this sub-menu.
Press [Enter] to launch the General ACPI Configuration screen. Press [Enter]
again to view the ACPI state.
In the above screen, the current setting is displayed. Press [Enter] to change the
ACPI state to use when the system goes to suspend mode.
Available options are:
•
S1 (POS): Power On Standby. All processor caches are flushed and the
CPU stops executing instructions. The CPU and RAM power are maintained,
however, other devices may be powered down.
•
S3 (STR): Commonly referred to as Standby or Sleep. RAM is still powered.