VIEWSONIC VPC100 - Manual (Page 39)

ViewSonic VPC100 28
BIOS Setup Utility
• Internal Graphics Mode Select: Selects the amount of system memory used
by the internal graphics device.
• DVMT Mode Select: Dynamic Video Memory Technology (DVMT) is a
concept used in integrated video wherein the optimum amount of memory is
dynamically allocated and de-allocated as needed to balance graphics and
system performance. Available modes are: Fixed, DVMT, and Combo.
• DVMT/FIXED Memory: Set the amount of memory allocated for DVMT.
• High Performance Event Timer: Select whether to enable or disable this
option.
South Bridge Configuration
Your All-in-One PC uses Intel ® ICH7M South Bridge Chipset. South Bridge
chipset is not directly connected to the CPU, instead the North Bridge chipset
ties it to the CPU. The South Bridge Chipset implements the slower performance
capabilities, such as the audio controller, PCI bus, and power management
among others.
To change the settings, select an item then press [Enter] to view the options.
• Audio Controller: Select the audio controller among the list.
• Wireless Lan Control: Turn wireless LAN control on or off.
• Camera Control: Turn camera control on or off.
• Onboard LAN Boot: Enable or disable Onboard LAN boot.
• Restore on AC Power Loss: Select the mode when system is restored after
an AC power loss. Options are: Power Off, Power On, and Last State.
• PS2 KB/MS Wake up: Enable or disable PS/2 keyboard and mouse wake up
controls.
• Resume On RTC Alarm: Enable or disable RTC to generate wake events.
When enabled, the following items are required:
• RTC Alarm Date (Days): Use [+] and [-] keys to adjust the date.
• RTC Alarm Time: Press [Tab] to select a field. Use [+] and [-] keys to
adjust the values.