Vivotek ST3402 - Manual (Page 27)

3-26
3.4.2 Local Settings
In the local settings, as shown in
X
Figure 3-4
X
, there are three main functions:
Figure 3-4 Local Settings
Insert – This allows the user to insert a remote Video Server / Network Camera
series product to the camera list. Click on the “Insert” button, an “Insert New Channel”
dialog will pop up, as shown in
X
Figure 3-5
X
. Specify the IP address, port and root
password of the remote Video Server / Network Camera series product, and click on
the “Ok” button to close the dialog. The system will try to connect to the selected
camera. If the connection is successful, the camera will be inserted to the list.
Figure 3-5 Insert New Channel Dialog
Delete – This removes the selected Video Server / Network Camera series product
from the camera list. You should select a camera as shown in
X
Figure 3-6
X
to remove.
IP address and port
Insert camera
Delete camera
History