The layout – Vivotek ST3402 User Manual
Page 46
3-45
Figure 3-27 Close the Channel
NOTE: Even the channel is closed for current layout. The network connection is still
connected. The reason to keep the connection is that if the connection is closed, it is
not possible for Monitor to judge if any event is triggered.
3.7.2
39B
The Layout
There are six kinds of layouts shown in
X
Figure 3-28
X
for displaying frames in the
Monitor tool. You can select one of them by clicking on the left mouse button over the
layout icon you want. In each layout, you can select, drag, and drop the “channel
number” to any display frame in the video area. The video from the remote site will be
shown. Following the procedures described in Section
X
3.7.1.1
X
, you can add the video
of the channel to the display frame of the selected layout in the video area one by one.
After that, you can also exchange video between different display frames by the same
select, drag, and drop method.
Press and hold mouse button here.
Move mouse cursor here, and then
release mouse button here.