Vivotek ST3402 - Manual (Page 37)

3-36
NOTE: You must select the input signal format according to the camera type or CCD
module type that is connected to the remote Video Server / Network Camera series
product, regardless of the power line connected is 50 or 60 Hz.
Display Options:
In the video displaying frame of each channel, there are two status bars associated
with it. On the upper side, the status contains “Camera location” and “the time of the
remote site”. On the lower side, the status includes “Connection time” and “Recording
time”. As shown in
X
Figure 3-16
X
, all can be enabled or disabled individually. The “Apply
to full screen mode” can also be turned on. Once it has been selected, the status bar
in each channel will show the date, location, connection and recording time in both
displaying frame mode and full screen mode.
Figure 3-16 Status on the Displaying Frame
Miscellaneous:
9 Click on image to enable PTZ －
Enable this option can let you control PTZ by clicking on displaying frame. If this
option is enabled, the cursor icon will be changed when cursor moving into a
displaying frame which associates with a PTZ-enabled Video Server / Network
Camera series product, as shown in
X
Figure 3-17
X
. You can move camera to any
point you want by clicking on displaying frame.
Location (channel number + Text on Video)
Remote Time (according to time format)
Connection Time (Day:Hour:Min)
Recording Time (Day:Hour:Min)