Vivotek ST3402 - Manual (Page 29)

3-28
3.4.3
35B
Alert Settings and Recording Settings
Figure 3-8 Alert Settings and Recording Settings
Alert Settings:
These settings guide this program how to handle motion detection, digital input alerts,
video loss and remote alert.
9 Enable motion detect －
With this checkbox checked, the program will trigger the alert sound (specified in
“3.5
X
Global Settings
X
\ Alert Sound”) if motion is detected for the specified channel.
9 Enable digital input －
This function is similar with that of “Enable Motion Detect”. Selecting this option
will activate the alert sound when the digital input of the remote Video Server /
Network Camera series product is triggered.
9 Digital input alert －
This option allows for defining the triggering criterion of the digital input of the
remote Video Server / Network Camera series product. It can either be high-level
triggered or low-level triggered.
9 Enable video loss －
Enable this option will trigger alert when video loss. The video loss will occur
when Video Server is connected and do not connect to any proper camera.
9 Enable remote alert －