Vivotek ST3402 - Manual (Page 33)

3-32
9 Snapshot directory －
This is the directory for storing the snapshots in *.bmp format from channels as
shown in
X
Figure 3-11
X
.
9 Recording
directory －
This is the directory for storing the recorded media data from remote channels.
9 Scheduler
directory －
This is the directory for storing the default and user-customized plots for the
recording schedule of each channel.
Record Diskspace Usage Settings:
9 Cycle
Recording －
When this setting is turned on, the media database system will overwrite the
oldest data if the usage of the current database has reached its storage limitation.
In other words, it will record media data circularly. If this setting is not selected, i.e.
unchecked, a warning message will pop up when it is approaching the limitation.
After that, it stops recording when the limitation of the hard disk usage is reached.
9 Reserved
space －
This indicates the size of the hard disk to be reserved on the recording disk. If the
recording data exceeds this limitation, the new in-coming media data will replace
the oldest data if “Cycle Recording” was selected. Pre-buffer mechanism will take
some space if some channel is already configured but not recording.
Internet Settings:
You can set the proxy server and the IP filter by clicking on the “Internet Settings”
button. This setting is helpful for connecting Video Server / Network Camera series
product in the Intranet while the proxy server is in use at the same time.
You can enable or disable the usage of the proxy server by the check box shown
in
X
Figure 3-12
X
. If you enable both the proxy server and IP restriction, the listed IP
addresses will not be applied to the proxy server. Often, the listed IP address will be
the one assigned to the Visual Server / Network Camera series product in the
Intranet.