Vivotek ST3402 - Manual (Page 61)

4-60
It consists of day time-line, week time-line, begin time selector, end time selector, and
event mode settings.
Secondary Schedule:
It consists of event mode settings.
Operation Buttons:
It contains operation buttons for the user to fine tune the edited schedule-scheme of
the selected channel, and close the Scheduling tool window.
These four parts will later be described in detail.
4.2.2
48B
The Functionalities of Configuration
Components
Figure 4-3 Channel Selector
The channel selector shown in
X
Figure 4-3
X
is typical for a dedicated channel. When
you click on the row to select the channel, the scheduling tool will load the dedicated
schedule scheme associated with the selected channel automatically. If the remote
Video Server / Network Camera series product has been properly configured, the IP
address and location of the selected channel will be shown. Please note that when
you switch between channels in this selector, any editing and changes in the
schedule scheme will be saved temporarily in system memory. To save the settings
permanenty, please click on the “Save” button.
Channel
IP address
Location