VXI VM4016 - Manual (Page 15)

www.vxitech.com
VM4016 Preparation for Use 15
S
ECTION
2
P
REPARATION FOR
U
SE
I NSTALLATION
When the VM4016 is unpacked from its shipping carton, the contents should include the
following items:
One VM4016 VXIbus module
One VM4016 Analog Comparator Module User’s Manual (this manual)
All components should be immediately inspected for damage upon receipt of the unit.
Once the VM4016 is assessed to be in good condition, it may be installed into an appropriate
C-size or D-size VXIbus chassis in any slot other than slot 0. The chassis should be checked to
ensure that it is capable of providing adequate power and cooling for the VM4016. Once the
chassis is found be adequate, the VM4016’s logical address and the chassis’ backplane jumpers
should be configured prior to the VM4016’s installation.
C ALCULATING S YSTEM P OWER AND C OOLING R EQUIREMENTS
It is imperative that the chassis provide adequate power and cooling for this module. Referring to
the chassis user’s manual, confirm that the power budget for the system (the chassis and all
modules installed therein) is not exceeded and that the cooling system can provide adequate
airflow at the specified backpressure.
It should be noted that if the chassis cannot provide adequate power to the module, the instrument
may not perform to specification or possibly not operate at all. In addition, if adequate cooling is
not provided, the reliability of the instrument will be jeopardized and permanent damage may
occur. Damage found to have occurred due to inadequate cooling would also void the warranty of
the module.