VXI VM4016 - Manual (Page 70)

VXI Technology, Inc.
70 VM4016 Command Dictionary
INHOUSE:REGINT
Purpose Controls the module’s response type to an interrupt acknowledge cycle
Type Setting
Command Syntax INHOUSE:REGINT <boolean>
Command Parameters <boolean> = 0 | 1 | OFF | ON
*RST Value
0
Query Syntax
INHOUSE:REGINT?
Query Parameters
N/A
Query Response
ASCII numeric 0 or 1
Description
The INHOUSE:REGINT command controls the module’s response type to an interrupt
acknowledge cycle.
When REGINT is set to false, the module uses reqt/reqf (request true/request false),
provided the latched interrupt bit is set tin the ‘SRE’. A reqt (upper 8 bits are 0x7D) is
generated for every latched event and a reqf (upper 8 bits are 0x7C) is generated for
every reading of the latched information using either pseudo register access or word
serial FETch:LATChed? Command.
When REGINT is set to true, only one interrupt is generated every time a latching
occurs. The upper 8 bits of the 16-bit SRE register on (0x7B).
Note: All letters of the command are required; there is no short form of the command.
Examples Command / Query Response (Description)
INHOUSE:REGINT 1 (Sets REGINT to true)
INHOUSE:REGINT? 1 (Indicates that REGINT is set to true)
Related Commands
INHOUSE:REG_ENABLE
INHOUSE:PSEUDO