Vision Fitness S70 - Manual (Page 30)

26
G
EN
ER
AL
TROUBLESHOOTING
Our Suspension Elliptical™ Trainers are designed to be reliable and easy
to use. If, however, you have a problem, these troubleshooting steps may
reveal the cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on the
backside of the console is turned on.
SOLUTION: Make sure the power cord is plugged into the base of the
Suspension Elliptical™ Trainer, and the power switch located near the
plug is on.
SOLUTION: Make sure the wire harness is plugged into the back of the
console.
PROBLEM: You feel a thump or hitch in the stride motion.
SOLUTION: Check assembly and tightness of all hardware.
SOLUTION: Check the bolts and the bracket under the footplate.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.
S70_101215.indd 26 12/15/10 1:04 PM