VocoPro CDG-X3P - Manual (Page 11)

10
Front panel controls and functions
1. POWER button - Turns on the power to the CDG-X3P.
2. TAPE COUNTER - Use the tape counter when playing or recording cassettes to keep track of your location on the
tape.
3. OPEN/CLOSE button - To open/close the disc tray.
4. RESET button - Push the reset button to reset the tape counter to zero when using the cassette deck.
5. DISPLAY button - When playing a CD/CDG disc and pressed once this button displays the remaining number of songs
to play on the disc, and time remaining in minutes and seconds to play them, in the CDG Display Window (#10). This
feature works only with the CD/CDG player. When pressed again the window displays the song selection number and the
elapsed time in minutes and seconds.
6. REPEAT button - When using the CD/CGD player and pressed once, this feature allows the user to repeat the cur-
rent song selection. When pressed twice all the songs on the disc will repeat once each. Songs will repeat until the but-
ton is pressed a third time. The display window will show which function you have selected,
“REPEAT” (repeats current song selection) or “ALL” (repeats all songs).
7. KEY CONTROL DISPLAY - Displays the number of half-steps up (+) or down ( - ) you have chosen. When the display
reads zero “0” you are in the song’s “natural” key.
8. MEMORY button - The memory function is used to program specific song selections in any order. First, you’ll need
to clear the memory. If there is a CD/CDG in the player press stop. Press the “OPEN/CLOSE” button once until the tray
opens and again to close it. Doing this will clear out any previously stored program(s) from the memory. Next, press the
“MEMORY” button once. There will be a ”P:01” with the word “PROGRAM” above it and two dashes (- -) to the left, shown
in the display window . Press the “NEXT” button the desired amount of times to display the song selection number you
wish to program first in your program order. The song selection number will be displayed where the two dashes were
(- -). Proceed to program the next song selection by pressing the “MEMORY” button again. Doing so will store your first
song selection and display a “P:02” and two dashes (- -) to the left. Repeat the process as above to program up to twenty
song selections. When finished, press “PLAY/PAUSE” to begin playing your selections. The program order will be stored
until the “OPEN/CLOSE” button is pressed again.
9. PREVIOUS SELECTION button - Press this button to select the previous song on the CDG disc being played. Press
once for each song you want to skip back to, or hold the button down to skip back continually. The selection number will
be displayed in the display window.
10. CDG DISPLAY WINDOW - This window displays the current song selection playing on the CDG disc.
11. NEXT SELECTION button - Press this button to advance the CDG to the next song selection. Press once for each
song you want to advance to, or hold the button down to advance continually. The selection number will be displayed in
the display window.
CDG PLAYER
KEY CONTROL VOC/C VOC/P CASSETTE CDG LD DVD AUX
POWER
OPEN
CLOSE
PLAY
PAUSE
DISP PREV NEXT B.SCAN F.SCAN STOP
MIC VOL
KEY
CONT
BASS TREBLE
ECHO VOL
MIC 1 MIC 2
MIC 1-2 VOL
REPEAT MEMORY
b #
1
2
3
4 5 6 7 8 9 10 11
Front Panel