VocoPro CDG-X3P - Manual (Page 8)

7
Getting connected
Connecting the CDG-X3P to a Television/Monitor
1. Connect one end of the RCA cable to the VIDEO OUTPUT on the rear panel of the CDG-X3P
2. Connect the other end of the RCA cable to the RCA video input on your Television Monitor.
NOTE: If your television does not have an RCA type connector you may use a VCR or an RF Modulator (not included) to
connect your monitor. (See “RF Connection”.)
���
TV/Monitor
RF Connection
AC 117/200W
OUTLET UNSWITCHED
FUSE
AC LINE
AUDIO INPUT TERMINAL AUDIO INPUT
AUX DVD LD PRE REC
VIDEO INPUT VIDEO INPUT
L
R
L
R MINIMUM LOAD IMPEDANCE:8ohm
L
R
TV/MONTOR