VocoPro CDG-X3P - Manual (Page 16)

15
Remote control functions
Using the Remote Control
The CDG-X3P comes with a handy remote control to al-
low the user to operate the Karaoke functions from up to
twenty-five feet from the unit. The remote control offers
the user fast forward, rewind, skip, search, program-
mable memory, play/pause, open/close for the CD/ CDG
tray and stop. The memory function can be used with the
remote control to program specific song selections when
using the CD/CDG player. The remote control will not work
with the tape deck. Be sure not to block the infrared eye
on the CDG-X3P or the sensor on the hand held remote
control. If either of these parts are covered while
attempting to use the remote control it will not function. All
the parts on the remote control correspond to the same
parts on the front panel of the CDG-X3P.
1. INFRARED REMOTE SENSOR: The sensor on the
top of the hand held remote control communicates with
the infrared sensor on the front panel of the CDG-X3P and
should not be covered or the remote control will not work
properly.
2. OPEN/CLOSE: The OPEN/CLOSE button on the hand
held remote control operates the CD/CDG tray. Press
once to open the CDG tray and again to close the tray.
3. DISPLAY: The display button when pressed once will
show the user the remaining number of played-played song
selections on the CD/CDG disc and the amount of time
left to play them. It serves the same function as the
“DISPLAY” button on the front panel of the CDG-X3P.
4. MEMORY: The MEMORY button allows the user to pro-
gram song selections from the hand held remote control.
To program the CDG-X3P player with the remote control
the steps are the same as to program the player from
the front panel of the CDG-X3P. When programming song
selections, instead of pressing the memory button on the
CDG-X3P, press the memory button on the remote control.
5. REPEAT: The REPEAT button on the hand held remote
control allows the user to repeat one song selection or all
song selections.
6. SKIP: The SKIP button on the hand held remote control
allows the user to “skip” back to the previous song. When
a song is playing it serves as a “rewind” button and will
“SCAN” the song selection in reverse. On the front panel of
the CDG-X3P it is the same as the ”B-SCAN” and “PREV”
buttons combined.
7. SEARCH: The SEARCH button on the hand held remote
control allows the user to”skip” ahead to the next song.
When a song is playing it serves as a “fast-forward” button
and will “SCAN” the song selection. On the front panel of
the CDG-X3P it is the same as the ”F-SCAN” and “NEXT”
buttons combined.
8. STOP: Stops the CD/CDG player.
1
2
3
4
5
6
7
9
10
8
9. PLAY: Starts and pauses the CD/CDG player. Press
once to start song selection and once to pause. Press
again top resume playing song selection.
10. BATTERY COMPARTMENT: On the back of the
hand held remote control there is a cover that slides off to
expose the battery compartment. Push cover down with
thumb and slide off. The hand held remote control uses
two “AAA” size batteries.
Remote Control