VocoPro CDG-X3P - Manual (Page 12)

11
Front panel controls and functions cont.
12. B-SCAN - Press this button to scan the song selection in reverse. This feature works the same as the “rewind” key
on a cassette deck. The difference between this feature and the “PREV” selection control button is this feature reverses
the CDG within the song selection and the “PREV” button skips back to the previous song.
13. F-SCAN - Press this button to forward scan the song selection. This feature works the same as the “fast-forward”
key on a cassette deck. The difference between this feature and the “NEXT” selection control button is this feature
advances the CDG within the song selection and the “NEXT” button skips forward to the next song.
14. STOP - This button stops the CDG from playing.
15. REMOTE SENSOR - This window allows the CDG-X3P to communicate with the hand held remote control. Do not
block the window or the remote control will not work properly.
16. PLAY/PAUSE - Use this button to start playing the song selction and/or to pause the selection at any time during
play. Press once to play, press again to pause. If paused, press once to resume playing song selection.
17. BASS CONTROL - This controls the amount of bass tone in the music being played.
18. MUSIC VOLUME - This controls the volume of the music being played.
19. TREBLE CONTROL - This controls the amount of treble tone in the music being played.
20. MIC VOLUME 1-2 - This controls the volume for the both microphone inputs.
21. ECHO CONTROL - Control the Digital Echo levels for both microphones. Turn Clockwise to increase the Echo level
and counter-clockwise to decrease the Echo level.
22. MIC 1 - Microphone input jack.
23. KEY CONT. - This is used to connect the optional “key control” microphone. (not included)
24. MIC 2 - Microphone input jack for a 2nd microphone.
25. AUX - Auxilliary input selector button. Pressing this key will select the component that is connected to the auxilliary
input.For example, if an additional tape deck or CD player is used with the CDG-X3P, and it is connected to the “AUX”
input jacks, this button will need to be selected before the component can be used.
26. DVD - Digital video disc input selector button. Pressing this button will select the component that is connected to the
DVD input jacks. For example, if a DVD player is used with the CDG-X3P, and it is connected to the “DVD” input jacks, this
button will need to be selected before the component can be used.
27. LD - Laser disc input selector button. Pressing this button will select the component that is connected to the “LD”
input jacks. For example, if a DVD player is used with the CDG-X3P, and it is properly connected to the “LD” input jacks,
this button will need to be selected before the component can be used.
28. CDG selector button - This button must be pressed when playing a CD or CDG disc in the CDG-X3P.
NOTE: This button must be pressed if you are recording from the CGD player in the CDG-X3P onto the cassette deck
otherwise you will not be able to hear the CDG disc that is playing.
CDG PLAYER
KEY CONTROL VOC/C VOC/P CASSETTE CDG LD DVD AUX
POWER
OPEN
CLOSE
PLAY
PAUSE
DISP PREV NEXT B.SCAN F.SCAN STOP
MIC VOL
KEY
CONT
BASS TREBLE
ECHO VOL
MIC 1 MIC 2
MIC 1-2 VOL
REPEAT MEMORY
b #
12 13 14 15 16 17 18 19
21
20
22 23 24
25
26
27
28
Front Panel