Vantec UGT-IS602R - Manual (Page 24)

6. The status of the Rebuild process is reflected in the properties of
the virtual disk, as shown in Figure 20.
Figure 20 Rebuild Status
To pause the rebuild process
1. In the Topology pane, scroll to the partially rebuild Virtual Disk.
2. Press Enter to view available operation on Virtual Disk.
UGT‐IS602R Page 24
3. Scroll to Pause and press Enter to pause the rebuild process.
Note: Incomplete rebuild procedures are paused upon exiting the
BIOS. The rebuild procedure(s) can be resumed manually upon
re-entering the BIOS.