Vantec UGT-IS602R User Manual
Page 28
UGT‐IS602R Page 28
OK. (Change D:\ to match your CD-ROM drive letter)
14. Follow the on-screen instructions to complete the installation.
15. After successful installation, the device is listed in the Device
Manager as Marvell 91xx Config Device (under System Device)
For An Existing Installation
1.
Please insert the CD driver bound with 2+1 SATA 6G & PATA
PCI-E COMBO HOST CARD WITH RAID into your CD-ROM
Drive.
2.
At the Windows desktop, click Start, then Run.
3.
Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click
OK. (Change D:\ to match your CD-ROM drive letter)
4.
Follow the on-screen instructions to complete the installation.
5.
Restart Windows to complete the installation.
For Windows® XP-x64/Server 2003-x64
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
UGT-IS602R\XP_2003_Vista_2008_7\Floppy64” folder, found
on the driver CD, onto a blank floppy disk then follow the directions