Vantec UGT-IS602R User Manual
Page 31
UGT‐IS602R Page 31
3.
Insert the CD driver bound with 2+1 SATA 6G & PATA PCI-E
COMBO HOST CARD WITH RAID into your CD-ROM Drive,
please select Marvell 91xx SATA 6G Controller
(D:\UGT-IS602R\XP_2003_Vista_2008_7\Floppy32\mv91xx.inf),
then press Next. (Change D:\ to match your CD-ROM drive
letter)
4.
Continue with Windows OS installation.
5.
And there is an additional device Marvell 91xx Config SCSI
Processor Device is detected when Windows starts for the first
time.
6.
Please insert the CD driver bound with 2+1 SATA 6G & PATA
PCI-E COMBO HOST CARD WITH RAID into your CD-ROM
Drive.
7.
At the Windows desktop, click Start, then Run.
8.
Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click
OK. (Change D:\ to match your CD-ROM drive letter)
9.
Follow the on-screen instructions to complete the installation.
10. After successful installation, the device is listed in the Device
Manager as Marvell 91xx Config Device (under System Device)