About diagnostics – Velocity Micro SEAL-IT 100 User Manual

Page 15

Advertising
background image

11

Chapter 1: Introduction

SEAL-IT 100 Device Driver User Guide

8.

Select

File > Device File > Save.

If you are creating a new device file, you are prompted to enter a
name for your device file.

Alternatively, you can select

File > Save All. This saves the device file

and the current protocol file at the same time.

Related topics

About diagnostics

About this topic

This topic presents an overview of diagnostics software.

Read this topic if you need to set up or troubleshoot a device running
VWorks or BenchWorks software.

Background

Devices can be controlled in real time directly through the VWorks or
BenchWorks software Diagnostics using simple commands.

Diagnostics software is used for:

Troubleshooting

Setting teachpoints

Performing manual operations outside a protocol

Creating and editing profiles

For example, if an error occurs during a run that leaves a plate and the
robot where they should not be, you can use robot diagnostics to move
the plate and return the robot to its home position.

Types of diagnostics
software

Devices and robots manufactured by Velocity11 include their own
diagnostics software. You can find instructions for using this software in
the relevant user guide.

For information about...

See...

Device drivers

“About device drivers” on page 7

Setting generic device properties

“Setting the properties for a device” on
page 16

Adding a sub-process to a protocol

“Adding and linking Sub Process tasks”
on page 19

Opening diagnostics

“Opening diagnostics” on page 12

Advertising