Velocity Micro SEAL-IT 100 - Manual (Page 24)

Chapter 1: Introduction
SEAL-IT 100 Device Driver User Guide
20
3. If there is only one sub-process and you need to create a second
one, click Add New.
Associating the sub-
process to a device Because you can have more than one device that uses sub-processes on
a lab automation system, you must link each sub-process link icon with
one or more devices that you want the sub-process to be able to use. You
do this by setting the parameter for the sub-process link icon.
To link a Sub Process task to a device:
1. In the Pipette Process Editor, select the Sub Process link icon.
2. In the Available devices list of the Pipette Task Parameters toolbar,
select one or more pipettors to link to and click Add.
The selected pipettors move to the lower box and become available
for use.