Velocity Micro SEAL-IT 100 User Manual
Page 38
Chapter 2: SEAL-IT 100
SEAL-IT 100 Device Driver User Guide
34
To seal or trim a single plate using ABgene SEAL-IT 100
diagnostics:
1.
Open
ABgene SEAL-IT 100 Diagnostics.
2.
Click the Controls tab.
3.
If the SEAL-IT 100 is not initialized, click
Initialize this profile on the
Profiles tab.
4.
To seal a plate and cut (trim) the seal from the roll, click
Seal.
5.
To trim the seal roll, click
Trim.
You might do this after first loading a roll of seal.
Note: The parameters set in the profile are used for the sealing and
trimming operations.
Related topics
For more information about...
See...
Opening diagnostics
“Opening diagnostics” on page 12
The workflow for configuring the
SEAL-IT 100
“Workflow for configuring the SEAL-IT
100” on page 28
Creating a SEAL-IT 100 profile
“Creating a SEAL-IT 100 profile” on
page 29
Managing SEAL-IT 100 profiles
“Managing SEAL-IT 100 profiles” on
page 32
Initializing a device