Velocity Micro SEAL-IT 100 - Manual (Page 17)

13 Chapter 1: Introduction
SEAL-IT 100 Device Driver User Guide
2. In the Diagnostics window, select thedevice. Expand the general
name of the device, if necessary.
3. Click Device diagnostics. The device’s diagnostics dialog box opens.
Procedure 2 If you are using VWorks4 software
To open Diagnostics:
1. Click the Device File tab.
2. Select the device from the Devices toolbar.
Expand the general name of the device, if necessary.
3. Click Device diagnostics located at the bottom of the Devices
toolbar.
The device’s diagnostics dialog box opens.
If you are using VWork3 or BenchWorks software
To open Diagnostics:
1. Click the Device Manager tab.
2. Select the device from the Device List toolbar. Expand the general
name of the device, if necessary.