Final preparatio, Performance checklis, Door replacement & adjustment (36”w.) – Viking F20518A User Manual
Page 13: Final preparation, Optional center trim installation (36”w. double), Final installation (36”w. double), Op t io n 1 o p t io n 2
25
Optional Center Trim Installation (36”W. Double)
o
p
t
io
n
1
o
p
t
io
n
2
Install mounting brackets.
Insert center trim piece over mounting brackets.
1
3
1
2
2
Place door onto hinge arms.
Pull door stops up and slowly slide door down.
Door Replacement & Adjustment (36”W.)
Note: With purchase of DCT-VGSO-SS center trim kit.
24
7
8
1
3
2
9
10
Connect gas line and check
for leaks.
11
12
Final Installation (36”W. Double)
(cont.)
Remove all knobs, push buttons, bezels, and lower
access panel, side trim, and control panel.
Remove control box, disconnecting the
three harness connectors.
Attach 8” pipe nipple through lower oven cabinet to
upper oven pipe tee. Attach female connector to pipe
nipple. Attach flex tubing to female connector.
Reconnect three harness connectors and
replace control box.
Replace side trim, control panel, lower
access panel, control panel knobs,
push buttons, and bezels.