Vivotek IP7142 - Manual (Page 28)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
28 - User's Manual
Network
This section explains how to configure wired network connection for the Network Camera. It is
composed of the following five columns: Network Type, HTTP, Two way audio, FTP and RTSP
Streaming. When completed with the settings on this page, click Save to take effect.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is
intended to be accessed by local computers.
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a
DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera.
Please refer to Internet connection with static IP on page 9 for details.
Enable UPnP presentation: Select this option to enable UPnP TM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places. Currently, UPnP
TM is supported by Windows XP or later. Note that to
utilize this feature, please make sure the UPnP TM component is installed on your computer.
Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.
Network Camera (192.168.5.132)
http://192.168.5.132/index.html
Network Camera