Vivotek IP7142 - Manual (Page 61)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 61
Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc.
Reboot
This feature allows you to turn off and then turn on the Network Camera. It takes about one ~
two minutes to complete the process. When completed, the live video will be displayed in your
browser. The following message is displayed during the rebooting process.
If the connection fails after rebooting, manually enter the IP address of the Network Camera in
the address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory default. Two settings can be
excluded:
Network Type: Select this option to retain the Network Type settings (please refer to Network Type on
page 28).
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please refer to
System on page 22)
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.