Vivotek IP7142 - Manual (Page 79)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 79
level 0~7 6/6
The levels to distinguish the importance of information.
0 => LOG_EMERG
1 => LOG_ALERT
2 => LOG_CRIT
3 => LOG_ERR
4 => LOG_WARNING
5 => LOG_NOTICE
6 => LOG_INFO
7 => LOG_DEBUG
Group: camctrl_c<0~(n-1)> for n channel product
Name Value
Security
(get/set)
Description
panspeed -5 ~ 5 1/4 Pan speed -5 ~ 5
tiltspeed -5 ~ 5 1/4 Tilt speed -5 ~ 5
zoomspeed -5 ~ 5 1/4 Zoom speed -3 ~ +3
autospeed 1 ~ 5 1/4 Auto pan/patrol speed 1 ~ 5
focusspeed -5 ~ 5 1/4 Auto focus speed
dwelling 0 ~ 9999 1/4 Time to dwelling when patrol
axisx -8250~ 8250 1/4 Axis X coordinate, used internally
axisy -560 ~ 1664 1/4 Axis Y coordinate, used internally
pantilt_port <integer> 1/4 The pan and tilt channel.
pantilt_camid 0 ~ 255 1/4 ID of camera on pan/tilt channel.
zoom_port <integer> 1/4 The zoom channel.
zoom_camid 0 ~ 255 1/4 ID of camera on zoom channel.
preset_i<0~19>_
name
string[40] 1/4 The name of preset location.
preset_i<0~19>_
dwelling
0 ~ 255 1/4 The dwelling time of each preset location
uart
0 ~ (m-1), m is
uart count
1/4 Select correspond uart
cameraid 0~255 1/4 Camera ID to control external PTZ cameral
isptz <boolean> 1/7 To distinguish the video channel if mapping to a PTZ camera
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ operation
Group: uart
Name Value
Security
(get/set)
Description
ptzdrivers_
i<0~19, 127>_
name
string[40] 1/4 The name of the PTZ driver.
ptzdrivers_
i<0~19, 127>_
location
string[128] 1/4 The full path of the PTZ driver.
enablehttptunnel <boolean> 4/4 Enable HTTP tunnel channel to control UART.