Vivotek IP7142 - Manual (Page 50)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
50 - User's Manual
Application
This section explains how to configure the Network Camera to react in response to particular
situations. A typical application is that when a motion is detected, the Network Camera sends
buffered images to a FTP server or via e-mail as notifications.
To start plotting an event, it is suggested to configure server and media columns first so that the
Network Camera will know what action shall be performed when a trigger is activated.
Media Settings
In Media Settings column, click Add to open the media setting page. In this page, you can
specify what kind of media to send when a trigger is activated. A total of five media settings can
be configured.
ex. Motion detection,
Periodically, Digital input,
System reboot
Event Trigger
ex. Snapshot, Video Clips ex. Email, FTP
Media
(what to send)
Server
(where to send)
Action
In the illustation on the right side, an event
can be triggered by many sources, such
as motion detection or external digital
input devices. When an event is triggered,
you can specify what kind of action will be
performed. You can configure the Network
Camera to send snapshots or videos to your
email address or FTP site.