Veo Pan and Tilt - Manual (Page 11)

Network Camera User’s Guide
11/95
Connections
DC Power and Video Output Cable
The DC power input and video output cable are located on the Network Camera’s back
panel. The input power is 12VDC. Note that supply the power to the Network Camera
with standard power adapter included in package. Otherwise, the improper power
adapter may damage the unit and result in danger.
The Network Camera also provides composite video output. User can use BNC video
cable to connect the Network Camera with a TV monitor or VCR.
LAN Socket
Beside the DC power and video output cable, the LAN socket is an RJ-45 connector for
connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet
port built NWay protocol can detect or negotiate the transmission speed of the network
automatically. Please use Category 5 “straight through” cable to connect the Network
Camera to a 100Mbps Fast Ethernet network switch or hub.