Veo Pan and Tilt - Manual (Page 42)

Network Camera User’s Guide
42/95
Type the path to the destination.
Image file name:
Type the basic file name you want to assign to the images when sending to the FTP
server.
Suffix:
Select the suffix to add to the file name.
- None:
No suffix is added. The basic file name is assigned to the image to be
sent to the FTP server.
- Date/Time:
The date/time suffix is added to the file name. The date/time suffix consists of
lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits) and consecutive number (2 digits), thus
14-digit number is added to the file name.
- Sequence number:
A consecutive number is added to the basic file name. A number of up to 10
digits between 0000000000 to 4294967295 is added to the file name.
Sequence No. clear:
Reset the sequence number to 0000000000.
Mode:
Send a captured image via three different situations – via event such as motion detected
or sensor1/2 activated or send it periodically or off.
Select “SAVE” to save the setting.