Verizon CustoPAK - Manual (Page 19)

35
Call Park
Call Park functions like Call Pick-Up except that the call is already in progress.
You can “park” an established call on your line against your own number, freeing
up your line to place or receive another call. The parked call can be retrieved
from any other station within the CustoPAK system, including your own. Only one
call can be parked against a CustoPAK line at a given time. This feature is not
available in the DMS 10 switch type.
To “park” a call against your number:
Ī Tell the person to whom you are speaking that you are going to put them on hold.
Ī Press the switchhook (or the Tap/Flash/Recall/Link button, depending on your
telephone set).
Ī Press and listen for confirmation tone.
Ī Hang-up.
To retrieve a call you “parked” against your number:
Ī Lift the handset and listen for dial tone.
Ī Press and listen for confirmation tone.
Ī Begin your conversation.
NOTES:
1.) If a parked call is not retrieved, the parking station will be recalled when idle.
2.) A station in the “call parked” condition cannot use the Three-Way Calling feature.
3.) Call Waiting will not activate against a number in a “parked” condition.
3 1 *
1 1 *
34
Call Block (*60)
Call Block provides you with the capability to block up to 12 external telephone
numbers (within your regional calling area) from calling your number, preventing
unwanted and nuisance calls. Once activated, any calls from these 12 numbers
will be routed to an intercept message. For your protection, calls from outside
of your regional calling area and operator-handled calls cannot be blocked.
This feature is not available in the DMS 10 switch type.
To access the Call Block feature:
Ī Lift the handset and listen for dial tone.
Ī Press .
Ī Listen to the voice-recorded instructions for Call Block options.
GTD-5 switch type only:
If you are a member of a Hunt group, you must:
Ī Lift the handset and listen for dial tone.
Ī Press .
Ī Listen to the voice-recorded instructions for Call Block options.
NOTES:
1.) Blocked calls will not be forwarded on any Call Forwarding arrangement
and will not appear on Caller ID displays.
2.) Call Block takes precedence over Series Hunting.
3.) This feature must be applied to all members of a Hunt group.
0 6 #
0 6 *