Vizio VP503 User Manual
Page 10
VIZIO
®
VP503 HDTV10A User Manual
Version 5/27/2008
10
www.VIZIO.com
1.3
1.3
1.3
1.3
Rear Panel Connections
Rear Panel Connections
Rear Panel Connections
Rear Panel Connections
1.
SERVICE – This custom communication port is for factory service only. Use of this input for
any purpose other than factory authorized service will void the manufacturer’s
warranty of this equipment.
2.
HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
3.
HDMI 2 – Connect a secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. .
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZIO.com
or by calling 888-VIZIOCE (888-849-4623).
4.
RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. A 1/8” plug stereo cable is needed to connect the
audio out from the computer to the connector in the rear of the TV for audio from computer.
5.
COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the source for component video
devices such as a DVD Player or set top box here. From left to right, use white for left audio
and red for right audio inputs, green for Y, blue for Pb (or Cb) and red for Pr (or Cr). The
green color band on the rear of the TV indicates this connection.
6.
AV/S-VIDEO IN – Connect the primary source for composite video devices, such as a VCR
or video game. Use the white and red connectors to connect the external audio from the
same source, then use the S-Video or yellow connector to connect the external video from
the same source. The S-Video, if connected, will take priority over AV RCA (yellow)
connector. The yellow color band on the rear of the TV indicates this connection.
7.
OPTICAL AUDIO OUT – When an audio signal is associated with an input which is selected
for viewing, the audio associated with the programming will be available on this SPDIF
Optical connector for connection to your home theatre system. The white color band on the
rear of the TV indicates this connection.
8.
ANALOG AUDIO OUT – Connect the audio from the PLASMA HDTV to an external device,
such as a home theater system, external amplifier or stereo. Speakers cannot be connected
directly to here. The white color band on the rear of the TV indicates this connection.
9.
DTV/TV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for
Digital and Analog TV.*
10.
AC IN – Plug-in the supplied AC Power Cord here.
* For digital TV stations in your area visit
www.antennaweb.org
.
1
2
3
9
8
4
6
5
7
10