Vizio VP503 - Manual (Page 26)

VIZIO ® VP503 HDTV10A User Manual
Version 5/27/2008 26
www.VIZIO.com
2.7.1 2.7.1 2.7.1 2.7.1 Optical Output of Audio Optical Output of Audio Optical Output of Audio Optical Output of Audio received received received received
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VP503 HDTV10A.
1. Turn off the power to the PLASMA HDTV and
Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the
audio input connector on the Receiver/Amp and
connect the other end to the OPTICAL OUT (white
area) audio connectors at the rear of the PLASMA
HDTV.
3. Turn on the power to the PLASMA
HDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the ► on the remote control to
select the Audio Adjust menu.
6. Press the ▼ on the remote control to
select SPEAKERS.
7. Press the ► on the remote control to
select OFF so that the sound from the
PLASMA HDTV will now be routed
through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.