Vizio VP503 - Manual (Page 40)

VIZIO ® VP503 HDTV10A User Manual
Version 5/27/2008 40
www.VIZIO.com
4.2.6 4.2.6 4.2.6 4.2.6 Sharpness Sharpness Sharpness Sharpness
Press the ▼ button to highlight the Sharpness selection.
Press the ► button to start adjusting the sharpness and the menu page will disappear and be replaced by
a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum
available levels. Use the
◄ or ► button to adjust the level.
The Sharpness adjusts the sharpness of the picture.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.2.7 4.2.7 4.2.7 4.2.7 Advanced Video Features Advanced Video Features Advanced Video Features Advanced Video Features
Press the ▼ button to highlight the option for Advanced Video selection and press either the ► button to
select it. A new menu will be displayed showing the advanced functions available for fine tuning of the
picture.
Noise Reduction (NR)
Press the ▼ button to highlight Noise Reduction
(NR). Use this feature to diminish picture artifacts
caused by the digitizing of image motion content
that may be present in the picture. Press the
◄ or
► button to choose from the Off, Low, Medium or
Strong setting.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
Color Enhancement
Press the ▼ button to highlight Color Enhancement. Use this feature to increase the picture reproduction
performance of the picture.
Press the
◄ or ► button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Advanced Adaptive Luma
Press the ▼ button to highlight Advanced Adaptive Luma. Large areas of darkness in a picture will result
in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature
will raise the APL to counteract this effect.
Press the
◄ or ► button to choose from the Off, Low, Medium, Strong, or Extend setting.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.