Vizio VP503 - Manual (Page 54)

VIZIO ® VP503 HDTV10A User Manual
Version 5/27/2008 54
www.VIZIO.com
4.5.8 4.5.8 4.5.8 4.5.8 DTV / TV Input Parental Control DTV / TV Input Parental Control DTV / TV Input Parental Control DTV / TV Input Parental Control
If you want to restrict certain channel and program
viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels
can then be made available only after an
authorized password has been entered and
accepted by the TV.
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page.
Press the
► button to display the SETUP page.
Press the ▼ button to highlight Parental, then
press the ► button.
The Password must be entered before the TV will
continue with Parental settings. The default
password set in the factory is 0 0 0 0. If you are
going to use the Parental Control feature you
should change the password.
4.5.9 4.5.9 4.5.9 4.5.9 Rating Enable Rating Enable Rating Enable Rating Enable
Press the ▼ button to highlight the Rating Enable
selection.
Press the ► button to turn-on or turn-off the
blocking of programming.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 59) does NOT reset the password.