Vizio VP503 - Manual (Page 30)

VIZIO ® VP503 HDTV10A User Manual
Version 5/27/2008 30
www.VIZIO.com
a. The Tuner screen will be
displayed; default choice is
Antenna. If you are using Cable
(No Box) Service, press the
▼
button on the remote control to
highlight CABLE.
Press the
► button on the remote
to go to the next screen.
b. The Channel Scan screen will be
displayed; default choice is Scan.
Press the
► button on the remote
control to commence the search for
available channels to be stored into
memory.
If you do not want to scan for channels
at this time, press the
▼ button on the
remote to highlight Skip Scan and then
press the
► button.
Note: If you select Skip Scan, next time that you decide to complete this procedure; you will need to
select the TV as input (through the Input key) and then go through the Menu option to select the Tuner
setup to get the option of scanning the channels again.