Visioneer XP220 - Manual (Page 12)

S TEP 1: I NSTALL THE S OFTWARE 5
S
TEP
1: I
NSTALL THE
S
OFTWARE
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert Disc 1 into your computer’s CD-ROM drive.
Note: You must install the software before connecting the scanner to
your computer. Otherwise, the correct driver software for your scanner
will not be installed and it may not work properly.
Note: If the CD does not start automatically, check the following:
■ Make sure you have inserted Disc 1.
■ Make sure the CD drive’s door is completely shut.
■ Make sure the CD was inserted in the drive in the proper
direction (label side up).
To launch the CD manually:
■ Open the Windows option for My Computer. You can do this by
double-clicking on the
My Computer icon on your desktop.
■ Double-click the icon for your CD-ROM drive.
■ The Installation menu for the CD should now open.
If the menu does not open:
■ From the list of files on the CD, double-click the file named
START32.EXE.