Visioneer XP220 - Manual (Page 162)

H OW TO T URN A UTO L AUNCH O FF /O N 155
4. Select the Device Settings tab.
The options are the same as shown on the Device Configuration
Properties above.
5. Click to uncheck the option, Enable the generation of events
when paper is inserted into the scanner, to turn off the
AutoLaunch feature.
6. Click OK, then close the Scanners and Cameras Control Panel
window.
7. To turn the AutoLaunch and Excessive Skew features back on later,
follow the same process, but click Reset Device or re-select the
options you unchecked in Step 2 above, and click OK.