Visioneer XP220 User Manual
Page 165
158
V
ISIONEER
S
TROBE
XP 220 S
CANNER
U
SER
’
S
G
UIDE
8. Click OK, then close the Scanners and Cameras Properties
window.
9. To turn the AutoLaunch and Excessive Skew features back on later,
follow the same process, but click Reset Device or re-select the
options you unchecked, and click OK.
S
CAN
FROM
O
NE
T
OUCH
WHEN
A
UTO
L
AUNCH
IS
O
FF
If AutoLaunch is turned off, you can still scan from the OneTouch
Panel.
1. Open the OneTouch Panel.
2. Insert the document. The scanner rollers will grab the top edge of
the paper but won’t feed it through yet.
3. Click (not right-click) the PaperIn icon.
If you haven’t inserted the document yet, a message above the panel
tells you to insert the document.
4. Scanning begins and the scanner rollers feed the document through
the scanner.
The scan image will appear in the Destination Application indicated by
the icon on the OneTouch Panel.