Vision Fitness X6250HRT - Manual (Page 30)

26
X6250HR
T
X6250HRT ENGINEERING MODE
Engineering consists of optional settings and information used by service
technicians to assure your product is working in proper order. There are
also several default settings that allow you to customize the incline elliptical
trainer to fit your needs.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP ▲ and DOWN ▼ RESISTANCE ARROW keys
simultaneously for three seconds.
• The console will beep and bring you into engineering mode. Use
the UP ▲ and DOWN ▼ RESISTANCE ARROW keys to scroll
through the various engineering options.
• Press the ENTER key to select the appropriate engineering option.
• Use the UP
▲ and DOWN ▼ RESISTANCE ARROW keys within
each setting to modify the setting
• Press the ENTER key to save the setting.
• To exit engineering mode, press and hold the START key for three seconds.
ENGINEERING OPTIONS INCLUDE:
HARDWARE TEST
LED TEST
DEF TIME SET
DEF LEVEL SET
DEF AGE SET
BEEPER MODE
SPEED MODE
MACHINE MODE
DOT DISP MODE
ACC TIME
ACC DIST
INCLINE TEST
AUTO-CALIBRATE
S E T T I N G
TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM
TEST USED BY SERVICE TECHNICIANS TO TEST LED DISPLAY
SET THE DEFAULT WORKOUT TIME
SET THE DEFAULT RESISTANCE LEVEL
SET THE DEFAULT USER AGE
TURN THE BEEPER ON OR OFF
SET THE FEEDBACK INFO TO ENGLISH (MILES) OR METRIC (KILOMETERS)
SET TO BIKE, ELLIPTICAL TRAINER, OR INCLINE ELLIPTICAL TRAINER
SET DOT MATRIX DISPLAY WHEN NOT IN USE
MEASURES TOTAL TIME IN HOURS OF USE
MEASURES TOTAL DISTANCE TRAVELED ON THE UNIT
TESTS AT ZERO, MIN., AND MAX.
AUTO-CALIBRATION OF ELEVATION MOTOR TO SET MIN, MAX AND ZERO POSITIONS
D E S C R I P T I O N