Vision Fitness X6250HRT - Manual (Page 40)

36
X6150
X6150 ENGINEERING MODE
Use the User Set option in Engineering Mode to adjust the Default Weight
and Default Level for you console.
ENTERING ENGINEERING MODE
• Press and hold the UP ▲ and DOWN ▼ RESISTANCE ARROW
keys simultaneously for three seconds.
• The console will beep and bring you into engineering mode. Use
the UP ▲ and DOWN ▼ RESISTANCE ARROW keys to scroll
through the various engineering options.
• Press the ENTER key to select the appropriate engineering option.
• Use the UP
▲ and DOWN ▼ RESISTANCE ARROW keys within
each setting to modify the setting
• Press the ENTER key to save the setting.
• To exit the engineering option you are in press and hold the START
key for three seconds.
• To exit engineering mode, press and hold the START key for three
seconds.
ENGINEERING OPTIONS INCLUDE:
DISP TEST
USER SET
ACC TIME
ACC DIST
HW TEST
INCL CAL
INCL SET
S E T T I N G
LCD TEST
SET DEFAULT LEVEL AND DEFAULT TIME
DISPLAY ACCUMULATED TIME
DISPLAY ACCUMULATED DISTANCE
TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM
AUTO-CALIBRATION OF ELEVATION MOTOR TO SET MIN, MAX AND ZERO
VIEW AND/OR ADJUST INCLINE ADC ZERO, MIN AND MAX VALUES (SET AFTER AUTO-
CALIBRATION)
D E S C R I P T I O N